Technical Information
67
Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Sound Selection button.
Audio Signal
STEREO
MAIN I
SUB II
MONO
Mode Indicator
NICAM
.......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Regular broadcast
(Standard Audio)
R NICAM MONO I
(MAIN I)
NICAM
STEREO
NICAM DUAL MONO
(MAIN I / SUB II)
Mode Indicator
No Indicator
I
II
A2 (German)
.......Used in Australia, Malaysia etc.
Type of broadcast
Regular broadcast
(Standard Audio)
BILINGUAL or DUAL MONO:
MAIN I / SUB II
STEREO
Mode Indicator
No Indicator
●
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
●
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
●
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using the
Sound Selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
Devices for playing back
■
SD Card
Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
24 mm
32 mm
2.1 mm
Card format:
SDXC Card - exFAT
SDHC Card / SD Card - FAT16 or FAT32
Compliant card type (maximum capacity):
SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring
miniSD adaptor)
●
If miniSD Card is used, insert / remove it together with the adaptor.
●
Check the latest information on the card type at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
■
USB Flash Memory
USB Flash Memory format: FAT16, FAT32 or exFAT
Note
●
Data modified with a PC may not be displayed.
●
Do not remove the device while the TV is accessing data. Otherwise this can damage device or TV.
●
Do not touch the pins on the device.
●
Do not subject the device to a high pressure or impact.
●
Insert the device in the correct direction. Otherwise this can damage device or TV.
●
Electrical interference, static electricity, or erroneous operation may damage the data or device.
●
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV.
Panasonic is not liable for any deterioration or damage of recorded data.
TH-L32_42_47E5KMT_EN.indd 67
TH-L32_42_47E5KMT_EN.indd 67
3/19/2012 1:45:36 PM
3/19/2012 1:45:36 PM
