10
AC Power Cord Connection
This LCD TV uses nominal input voltages of 220-240V AC.
It is designed to work with single-phase power systems. To
reduce risk of electrical shock, do not plug into any other type
of power system. Consult your authorised dealer or service
station if you are not sure the type of power being supplied.
Connect the LCD TV with all peripheral equipment before
turning the LCD TV on.
Caution
•
For safety, unplug AC power cord when the LCD TV is not
in use.
AC POWER CORD
Aerial or Cable Connection
Cable used for connection (This Outdoor Aerial cable is not
supplied with this LCD TV.)
•
Aerial Cable
*1
AV IN
PC AUDIO
via AV 2
AV1
IN
ST3
COMPONENT
ST3
ST3
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
*1: HDMI 3 is only for TH-L42U5Z model.
Note:
•
For all aerial circuit problems, please consult your local
dealer.
Note:
The examples used throughout this manual are based on the
TH-L32C5Z model.
Remote Control Batteries Installation
1. Remove the battery compartment cover.
2. Insert two size AAA batteries (1.5V) according to “+” and “-”
polarity markings inside the battery compartment.
3. Close the battery compartment cover.
Caution
To insure safe operation, please observe the following
precautions:
•
Replace two batteries at the same time.
•
Do not use a new battery with a used battery.
•
Avoid contacting with water or liquid.
•
Do not expose the Remote Control or Batteries to moisture,
or heat such as sunshine, fire or the like.
•
Do not drop the Remote Control.
•
If a battery has leaked on the Remote Control, carefully wipe
case clean and install new batteries.
•
Risk of explosion if battery is replaced by an incorrect type.
•
Dispose of used batteries according to the instructions.
•
Remote control contains AAA battery and must be kept out
of reach of small children to avoid accidental ingestion.
Summary of Contents for Viera TH-L32C5Z
Page 1: ......
