S VIDEO
9
Quick Start Guide
Identifying Controls
TV
Change the input mode
Mains power On / Off switch
Switch On to turn on the TV
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Function select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC
mode) / Bass / Treble / Balance /
“Digital TV Auto Tuning” or “Analogue
TV Auto Tuning” (p. 24 - 25)
C.A.T.S.
(Contrast Automatic
Tracking System) sensor
Senses brightness to
adjust picture quality in
“Eco Mode” in Picture
Menu (p. 24)
SD card slot
(p. 35)
Headphone
jack
(p. 46)
Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
AV3 terminals
(p. 46)
Power LED
Standby: red
On:
green
When using the remote control, indicates the TV has
received a command.
HDMI3
terminals
15°
15°
(View from the top)
Set the mark at the centre as illustrated,
to have the swivel positioned at the centre
of the rotation angle.
254 mm
359 mm
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
Adjust the LCD panel to your desired angle
Accessories / Options
Identifying Controls
TH-L26X10A_EN.indb 9
TH-L26X10A_EN.indb 9
8/7/09 10:04:42 AM
8/7/09 10:04:42 AM
