background image

5

Do not display a still picture for a long time

This causes the image to remain on the plasma 
screen (“image retention”).
This is not considered a malfunction and is not 
covered by the warranty.

Typical still images

Programme number and other logos

Image displayed in 4:3 mode

Video game

Computer image 

To prevent image retention, contrast is lowered 
automatically after a few minutes if no signals are 

sent or no operations are performed. (p. 45)

Ŷ

When cleaning the TV, remove the 
mains plug

Cleaning an energized TV may cause electrical shock.

Ŷ

When the TV is not going to be used for a 
long period of time, remove the mains plug

This TV will still consume some power even in 
the Off mode, as long as the mains plug is still 
connected to a live socket outlet.

Ŷ

Transport only in upright position

Transporting the TV with its display panel facing upright 
or downward may cause damage to the internal circuitry.

Ŷ

Allow suffi cient space around the 
TV for radiated heat

Caution

Notes

When using the pedestal, keep the space between 
the bottom of the TV and the fl oor surface.

In case of using Wall-hanging bracket, follow the 
manual of it.

Ŷ

Do not block the rear air vents

Blocked ventilation by newspapers, table cloths, curtains, 
etc. may cause overheating, fi re or electrical shock.

Ŷ

Do not expose your ears to excessive 
volume from the headphones

Irreversible damage can be caused.

Ŷ

Auto power standby function

If no signal is received and no operation is 
performed in TV mode for 30 minutes, the TV will 
automatically go to standby mode.

Ŷ

Keep the TV away from these types of 
equipment

Electronic equipment

  In particular, do not place video equipment near 

the TV (electromagnetic interference may distort 
images / sound).

Equipment with an infrared sensor

  This TV also emits infrared rays (this may affect 

operation of other equipment).

Maintenance

First, remove the mains plug from the socket outlet.

Display panel

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent 
(1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Caution

The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.

Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).

Cabinet, Pedestal

Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. 
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Caution

Take care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)

Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)

Minimum distance

10

10

10

7

(cm)

Summary of Contents for Viera TH-58PY800P

















































Reviews: