Advanced
•
Link Functions
(Q-Link / VIERA
Link)
SD CARD
INPUT
EXIT
RETURN
OPTION
TV
39
You can control the theatre speaker with this TV remote control (point the remote
control at the TV’s signal receiver).
•
This function is available with the Amplifi er or Player theatre which has “HDAVI Control”
function.
•
If you cannot operate, check the settings and the equipment “Preparations” (p. 36)
Access and control the speaker volume
Direct TV Rec
Speaker Selection
VIERA Link Menu
Home Cinema
Start
VIERA Link Control
Recorder
Pause Live TV
Speaker Selection
Home Cinema
Select “Speaker Selection”
Set to “Home Cinema” or “TV”
Display “VIERA Link Menu”
select
set
Ŷ
Features available
(Using VIERA Link Menu)
Ŷ
Home Cinema
Amplifier or Player theatre will be
automatically turned on if it is in Standby
mode and the sound is from theatre
speakers connected to the equipment.
•
Volume up / down
•
Mute
•
The sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers
will be active.
Ŷ
TV
TV speakers are active.
Note
•
This function may not work properly depending on the connected equipment.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
Easy playback is also available by using the remote control for Amplifi er or Player theatre. Read the manual of
the equipment.
•
About HDMI cable for connecting Panasonic HD Video Camera, read the manual of the equipment.
•
If more than one equipment of the same type are connected to the TV by HDMI cables, for example two DIGA
Recorders to HDMI1 and HDMI2, VIERA Link will only be available for the lower terminal number, in this case
HDMI1.
•
“HDAVI Control 3” is the newest standard (current as of December, 2007) for HDAVI Control compatible
equipment. This standard is compatible with conventional HDAVI equipment.
•
To confi rm this TV’s version of HDAVI Control “System Information” (p. 23)
•
If you wish to enjoy the multi-channel sound
(e.g. Dolby Digital 5.1ch) via an Amplifi er, connect
with HDMI cable and Optical digital audio cable
(p. 34), and then select “Home Cinema”.
To enjoy the sound from the DIGA Recorder in
multi-channel sound, connect an HDMI cable from
the DIGA Recorder to the Amplifi er (p. 34).
Speaker
control
Speaker
Selection
