background image

3

  

When cleaning the TV, remove the 

mains plug

• 

Cleaning an energized TV may cause electrical shock.

  

When the TV is not going to be used for a 

long period of time, remove the mains plug

• 

This TV will still consume some power even in 

the Off mode, as long as the mains plug is still 

connected to a live socket outlet.

  

Transport only in upright position

• 

Transporting the TV with its display panel facing upright 

or downward may cause damage to the internal circuitry.

  

Allow suf

fi

 cient space around the 

TV for radiated heat

Caution

 Notes

  

Auto power standby function

• 

If no signal is received and no operation is 

performed in TV mode for 30 minutes, the TV will 

automatically go to standby mode.

  

Keep the TV away from these types of 

equipment

• 

Electronic equipment

  In particular, do not place video equipment near 

the TV (electromagnetic interference may distort 

images / sound).

• 

Equipment with an infrared sensor

  This TV also emits infrared rays (this may affect 

operation of other equipment).

Do not display a still picture for a long time

This causes the image to remain on the plasma 

screen (“image retention”).

This is not considered a malfunction and is not 

covered by the warranty.
Typical still images

• 

Programme number and other logos

• 

Image displayed in 4:3 mode

• 

Video game

To prevent image retention, contrast is lowered 

automatically after a few minutes if no signals are 

sent or no operations are performed.

 Maintenance

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to 

fi

 re or electrical shock.)

First, remove the mains plug from the socket outlet.

Display panel

Regular care: Gently wipe the surface clean of dirt by using a soft cloth.

Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent 

(1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.

Caution

• 

The surface of the display panel has been specially treated and may be easily damaged.

Do not tap or scratch the surface with your 

fi

 ngernail or other hard object.

• 

Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances

(this may degrade surface quality).

Cabinet, Pedestal

Regular care: Wipe the surface clean using a soft dry cloth.

Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. 

Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.

Caution

• 

Take care not to subject the TV's surfaces to detergent.

(A liquid inside the TV could lead to product failure.)

• 

Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances

(this may deteriorate the surface by peeling the paint).

• 

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

• 

When using the pedestal, keep the space between 

the bottom of the TV and the 

fl

 oor surface.

• 

In case of using Wall-hanging bracket, follow the 

manual of it.

  

Do not block the rear air vents

• 

Blocked ventilation by newspapers, table cloths, curtains, 

etc. may cause overheating, 

fi

 re or electrical shock.

  

Do not expose your ears to excessive 

volume from the headphones

• 

Irreversible damage can be caused.

 Notes / 

Maintenance

• 

Safety Precautions

Minimum distance

10

10

10

7

(cm)

Summary of Contents for Viera TH-37PV8P

















Reviews: