8
4
E
Insert the spigot on the two
bands
into the pedestal.
Keep the knob
pressed
Select two screws which have held the rear cover
of the TV (one screw each from right and left side
at the same height position).
Remove the two screws you selected, and attach
the clamps to the TV using the removed
screws.
Band (2)
Screw (2)
Nominal diameter 4 mm × 12
Wood screw (2)
Clamp (2)
Installation of the pedestal
■
Securing to a base
Fix pedestal and base together with band.
■
Securing to a wall
Fix to wall or post with strong commercial wire or chain.
Remove
Attach
■
Attaching the bands for fixing cables
To tighten:
To loosen:
Preventing the TV from falling over
The TV could fall over during an earthquake, etc.
We recommend that measures are taken to prevent the TV from falling over in such an event.
•
The information in this section is designed to reduce the risk of injuries caused by the TV falling over during an
earthquake, etc.
However, no measure can guarantee protection against all earthquakes.
•
The precautions in this section are recommendations for providing more secure installation of your TV if you live
in an earthquake prone area.
