Panasonic Viera TC-P50S60, Technical Manual, Page: 80 / 106

Slide 80
Yes
Place the positive lead of a voltmeter at pin 12 of connector P6 while the black lead is
connected to ground (Chassis ground). Plug in the TV.
Note: If the power LED does
not turn on automatically after the TV is plugged in as expected, then press
the power switch.
No
Does 15V
appears
momentarily
on pin13 of
CN P6?
Replace the A
board
Replace the P
board
Slide 80
Troubleshooting 2 Blinks Failure (TC-P55/60/65S60, P**ST60)
P6 Signal/Volt. A6
Pin# Description Pin#
1 Panel_Main_ON 14
2 S1 13
3 S2 12
4 STB5V_ON 11
5 STB5V 10
6 F15V_ON 9
7 GND 8
8 GND 7
9 F15V 6
10 F15V 5
11 GND 4
12 P15V 3
13 GND 2
14 15V_S 1
TC-P65ST60 TC-P65S60
TC-P60ST60 TC-P60S60
TC-P55ST60 TC-P55S60
TCP-50ST60 ----
Applies to Models
Start Here
P6
P
Blink
Code
List of boards likely to cause this symptom.
No Specific Order
2 Blinks P A
For all others S60
models go to the
previous page