9
Getting started
Power cord connection
To attach
To remove
Insert it firmly until the
tabs on both sides click
into place.
Keep pushing both
sides until they snap
and pull.
Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -).
Close
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the HDMI cable (not supplied) to reduce interference or
electrical noise.
Attach the ferrite core as close as possible to connector on the TV side as shown.
Close the ferrite core until it clicks.
Accessories/Optional
Accessory
