manualshive.com logo in svg

Panasonic Viera TC-L42D2, Technical Manual

Share
Download
Panasonic Viera TC-L42D2 Technical Manual Download Page 51

Slide # 51

1 Blink SOS Circuit

When the power button is pushed , IC8001 outputs the TVSUB ON command to turn on the 
main power supply and output the power_on voltages. Upon confirmation of the output 
voltages of the power supply, IC8001 sends the Inverter_ON command to P board.

On the power supply board, the Inverter_On command enters IC7800, the inverter control IC. 
IC7800 then outputs the trigger that turns on the oscillator IC7801. The sine wave output of the 
oscillator is provided to the switching transistors connected to T7801 to generate a magnetic 
field. The AC output at the secondary of T7801 is provided to the LCD panel via the connectors 
P5, P6, P7 and P8 to power the backlights.

When the inverter is operating properly, the inverter SOS input of the micro is pulled low.
If a malfunction occurs, a detection circuit located within IC7800 sends out a SOS command to 
alert the inverter control IC, IC7800. IC7800 conveys the SOS message to the main micro 
IC8001 by keeping the inverter SOS input high. The TV shuts down and the power LED blinks 
1 time.

Summary of Contents for Viera TC-L42D2


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands