English
13
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1
Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2
Pull out the cover.
3
Remove the assembly screws from the TV.
4
Pull out the pedestal from the TV.
5
Remove the assembly screws from the bracket.
Warning
Do not disassemble or modify the pedestal.
●
Otherwise, the TV may fall over and become
damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided
with this TV.
●
Otherwise, the TV may fall over and become
damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or
physically damaged.
●
If you use the pedestal when it is physically damaged,
personal injury may result. Contact your nearest
Panasonic Dealer immediately.
During set-up, make sure that all screws are
securely tightened.
●
If sufficient care is not taken to ensure screws are
properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might
fall over and become damaged, and personal injury
may result.
When removing the pedestal, do not remove the
pedestal by any methods other than the specified
procedure. (p. 13)
●
Otherwise, the TV and/or pedestal may fall over and
become damaged, and personal injury may result.
■
Moving the TV
Before moving the TV, disconnect all cables.
●
Move the TV with at least two people.
