40
VQT3P35
SETUP
INSTALLING THE CARD
Before using a newly purchased card or one that was used in another device,
be sure to format it with this camera (pages 119 and 130). If an unformatted
card is used, the card itself may become unusable.
4
Insert the battery pack
(page 36), then close
1
Push the battery cover lock to
the right to release it.
3
With the label side facing up,
push the card straight in until
you hear a click.
Battery cover lock
2
Open
Battery cover
5
Push the battery cover lock to
the left to lock it.
The colored label is visible when
the battery cover lock is not
completely closed. Be sure to
close the lock completely so that
the colored label is not visible.
Colored label
<When removing the card...>
h
To remove the card, press it in,
and then release. The card will
protrude slightly, and you can
then pull it out.
1
Push the middle
part of the card.
2
Pull the card out straight.
Summary of Contents for Viera Link HX-WA10
Page 62: ...62 VQT3P35 BASIC OPERATION SHOOTING How to use the accessories k Handstrap ...
Page 214: ...214 VQT3P35 ...
Page 215: ...VQT3P35 215 ...