background image

-  -

!

!

SAFETY PRECAUTIONS

IMPORTANT SAFEGUARDS

1. 

Read Instructions - 

All the safety and operating  instructions 

should be read before the unit is operated.

2. 

Retain  Instructions  -

  The  safety  and  operating    instructions 

should be retained for future reference.

3. 

Heed Warnings -

 All warnings on the unit and in the operating 

instructions should be adhered to.

4. 

Follow Instructions - 

All operating and user instructions  should 

be followed.

5. 

Electrical Connections -

 Only a qualified electrician should make 

electrical connections.

6. 

Attachments -

 Do not use attachments not recommended by the 

product manufacturer as they may cause hazards.

7. 

Cable  Runs  -

  All  cable  runs  must  be  within  permissible 

distance.  

8. 

Mounting -

 This unit must be properly and securely mounted to

    a supporting structure capable of sustaining the weight of the
    unit.  Accordingly:
 

a. The installation should be made by a qualified service person, 
and should conform to all local codes.

 

b.  Care  should  be  exercised  to  select  suitable  hardware  to 
install  the  unit,  taking  into  account  both  the  composition  of 
the mounting surface and the weight of the  unit. Be sure to 
periodically examine the unit and the supporting structure to 
make sure that the integrity of the installation is intact.  Failure 
to comply with the foregoing could result in the unit separating 
from the support structure and falling, with resultant damages 
or injury to anyone or anything struck by the falling unit.

UNPACKING

  Unpack carefully.  Electronic components can be damaged 

if improperly handled or dropped.  If an item appears to have 
been damaged in shipment, replace it properly in its carton 
and notify the shipper.

  Be sure to save:
1. The shipping carton and packaging material.  They are the 

safest  material  in  which  to  make  future  shipments  of  the 
equipment.

2. These Installation and Operating Instructions.

SERVICE

   For service on Panasonic/Videolarm equipment contact:
    Panasonic Technical Center
     54 West Gude Dr.
    Rockville  MD   20850-1150

    Phone:  301-762-5125
    Fax:  301-251-0347

1-800-58-6747

9:00 AM - 5:00 PM EASTERN TIME

CAUTION:  INSTALLATION BY 

QUALIFIED PERSONNEL ONLY

The lightning flash with an arrowhead symbol, 
within  an  equilateral  triangle,  is  intended 
to  alert  the  user  to  the  presence  of  non-
insulated  "dangerous  voltage"  within  the 
product's enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock 
to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to presence 
of  important  operating  and  maintenance 
(servicing)  instructions  in  the  literature 
accompanying the appliance.

PANASONIC TECHNICAL SUPPORT

CAUTION

RISk OF 

ElECTRIC SHOCk!

Summary of Contents for VIDEOALARM PODV7CPNS











Reviews: