Panasonic VDR-M50PP, User Manual, Page: 62 / 174

62
123
Jumping to Specified Point (Go To)
1
Press the MENU button
during playback.
2
Choose the option (point you
want to go to), and then press
the
A
button.
Top :To go to the start, and enter playback pause.
End :To go to the end of last scene, and enter
playback pause.
Specify :To go to a specified point and enter
playback pause. See the following for
details.
l
Specifying the point to view
1
Choose “Specify” in step 2 above, and then press the
A
button.
The screen for specifying the point to go to will
appear.
2
Use the joystick to select the desired time of chosen
point.
Tilt up : To select the start.
Tilt down : To select the end.
Tilt left or right :
–Press once: To move the cursor in 10-
second units (1-still units for
card)
–Hold down: To move the cursor in 1-
minute units (10-still units
for card)
3
Press the
A
button to enter the selection.
The DVD Video Camera will go to the specified point
and enter playback pause mode.
Pressing
A
again will start playback.
To cancel the “Go To” procedure midway, press the
g
button before going to the specified point.
Note
:
•
If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing “Top” will jump to
the beginning of selected scenes (P. 123).
•
When multiple scenes are selected, the total time of
selected scenes will appear in the “total recording time”
display.
•
With card, the number of stills will appear at the “TOP”,
“CURRENT”, “END” and “GO TO” indicators.
•
The cursor may not move at same-pitch intervals.
Go T o
RAM ENTER RETURN
En d
S p e c i f y
To p
Go T o
TOP END
ENTER
CANCEL
GO TO
0 : 00 : 00 0 : 24 : 24 0 : 03 : 26
0 : 03 : 26
TOP END CURRENT
Position of currently
played back image
Total recording time of
all selected scenes
Cursor
Cursor position
Go T o
TOP END ENTER CANCEL
TOP
GO TO
END CURRENT
0 : 0 0 : 00
0 : 00 : 00 0 : 24 : 24 0 : 03 : 26
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.