45
LSQT1011
Se
tu
p
Setting date and time
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will
appear.
≥
Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time, then adjust it.
¬
Rotate the mode dial to select
or
.
1 Press the MENU button, then select [
BASIC]
#
[
CLOCK SET]
#
[YES] and press the joystick.
2 Move the joystick left or right to select the item to
be set. Then, move the joystick up or down to set
the desired value.
≥
The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥
The 12-hour system is used to display the time.
3 Press the joystick to enter the selection.
≥
After pressing the MENU button to finish the setting, check the date and time display.
≥
The clock function starts at [00] seconds.
D250&300(P_PC)eng.book 45 ページ ２００６年１月２０日 金曜日 午後２時３分
Summary of Contents for VDR-D300 (English, Spanish)
Page 179: ...179 LSQT1011 Others...
