Panasonic VDR-D300 (English, Spanish) Operating Instructions Manual Download Page 135

Page: 135 / 180

135

LSQT1011

Wit

Installation (Macintosh)

Installation (Macintosh)

≥

Before starting the installation, close any other software applications which are running.

≥

Do not perform any other operations on your computer while the software is being installed.

1 Insert the CD-ROM into the computer.

[PANASONIC] CD-ROM icon appears.

2 Double-click [PANASONIC]

[Imx for Panasonic]

[ImageMixer.pkg].

The installer setup screen appears.

3 Click [Continue].

4 Read carefully through the terms and conditions

shown on the screen for the [Software License
Agreement], click [Continue] and then click [Agree].

≥

You cannot install the application if you click [Disagree].

5 Click [Continue].

Continue to follow the on-screen messages to install it.

6 Click [Close].

D250&300(P_PC)eng.book 135 ページ２００６年１月２０日　金曜日　午後２時３分

Summary of Contents for VDR-D300 (English, Spanish)





















































































































































































Search results

Summary of Contents for VDR-D300 (English, Spanish)

Reviews:

Related manuals for VDR-D300 (English, Spanish)

Brands by name

Popular brands

Panasonic VDR-D300 (English, Spanish), Operating Instructions Manual

Search results

Summary of Contents for VDR-D300 (English, Spanish)

Reviews:

Related manuals for VDR-D300 (English, Spanish)

Brands by name

Popular brands