6.2. Service Position
Optical pickup
CAUTION: VISIBLE LASER RADIATION DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS CLASS 2M
Laser light striking the eye may cause your eyesight
to be lost: For safety, be sure to remove any power
supply (AC adaptor/charger, battery, etc.) from the
DVD video camera/recorder before starting work.
Caution
<CSA requirement>
6.2.1. Extension Cables for Service Position
Using the following Extension Cables, place the unit as shown for check and service.
Note :
1. The LCD open/close Switch is for changing between LCD Display or EVF Display. When turning on EVF Display, close the LCD
Shaft or place some paper or tape, etc. on LCD open/close Switch so that LCD open/close Switch stays ON.
2. To eject the DVD manually, slide the Lock lever on the Disc Cover Lock Unit for a short time or slide the EJECT switch.
3. Use a grounded ESD wrist strap while disassembling the Lens portion.
4. Connect the F.P.C.s to the connectors, verifying the direction of F.P.C.s.
The Main P.C.B. or a chip part will be damaged if the 60 Pin Extension Cable (LSUA0061) is misconnected.
5. Use extreme care when plugging in or unplugging connectors.
11
VDR-D210P / VDR-D220P / VDR-D230P / VDR-D210PC / VDR-D220PC / VDR-D230PC
Summary of Contents for VDR-D210P
Page 7: ...4 Specifications 7 VDR D210P VDR D220P VDR D230P VDR D210PC VDR D220PC VDR D230PC...
Page 12: ...Fig 3 12 VDR D210P VDR D220P VDR D230P VDR D210PC VDR D220PC VDR D230PC...
Page 38: ...38 VDR D210P VDR D220P VDR D230P VDR D210PC VDR D220PC VDR D230PC...
Page 50: ...VDR D210P VDR D220P VDR D230P VDR D210PC VDR D220PC VDR D230PC 50...
