Se
tup
Power supply
135
LSQT1182
≥
Along with the reduction of the battery capacity, the
display will change:
#
#
#
#
.
If the battery discharges, then
(
) will
flash.
≥
The recordable time will become shorter when you
use both the viewfinder and the LCD monitor
simultaneously while rotating the LCD monitor
frontward to record yourself, etc.
≥
The batteries heat up after use or charging. This
unit will also heat up while being used. This is not a
malfunction.
≥
Be aware that the operating time of the battery will
become shorter in low temperatures. We
recommend charging a spare battery for use when
recording.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
1 Connect the AC cable to the AC adaptor and
the AC outlet.
2 Connect the DC cable to the AC adaptor.
3 Connect the DC cable to this unit.
≥
Do not use the AC cable for other equipment since the AC
cable is exclusively designed for this unit. Do not use the AC
cable from other equipment for this unit.
≥
While the DC cable is connected to the AC adaptor,
the battery will not charge.
Connecting to the AC outlet
LSQT1182(GC ENG).book 135 ページ ２００７年１月１８日 木曜日 午後４時４４分
