Panasonic UF-5950 - Panafax - Fax Operating Instructions Manual Download

Page: 7 / 158

g to Know

our

ine

Getting to Know Your Machine

Safety Information

Denotes a potential hazard that could result in serious injury or death.

• TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF

MOISTURE.

• TO MINIMIZE THE POSSIBILITY OF SHOCK OR DAMAGE TO THE MACHINE, IT MUST BE PROPERLY

GROUNDED.

LASER SAFETY

THIS PRODUCT UTILIZES A LASER. ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPT TO
SERVICE THIS DEVICE DUE TO POSSIBLE EYE INJURY.

CAUTION

USE OF CONTROLS, OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

• THE POWER CORD ON THIS EQUIPMENT MUST BE USED TO DISCONNECT THE MAIN POWER.

PLEASE ENSURE THAT THE SOCKET OUTLET IS INSTALLED NEAR THE EQUIPMENT, AND IS

EASILY ACCESSIBLE.

• MAKE SURE THAT THE MACHINE IS INSTALLED IN A SPACIOUS OR WELL VENTILATED ROOM SO

AS NOT TO INCREASE THE AMOUNT OF OZONE IN THE AIR. SINCE OZONE IS HEAVIER THAN AIR,

IT IS RECOMMENDED THAT AIR AT FLOOR LEVEL BE VENTILATED.

• UNPLUG THIS UNIT FROM POWER OUTLETS IF IT EMITS SMOKE, AN ABNORMAL SMELL, OR

MAKES AN UNUSUAL NOISE.

THESE CONDITIONS CAN CAUSE FIRE OR ELECTRIC SHOCK.

CONFIRM THAT SMOKE HAS STOPPED AND CONTACT AN AUTHORIZED SERVICE CENTER.

• KEEP THE VERIFICATION STAMP OUT OF THE REACH OF CHILDREN. IF A STAMP IS SWALLOWED

ACCIDENTALLY, GET MEDICAL TREATMENT IMMEDIATELY.

WARNING

Manufacturer's
Name and Address

Factory ID

Summary of Contents for UF-5950 - Panafax - Fax































































































































































Search results

Summary of Contents for UF-5950 - Panafax - Fax

Reviews:

Related manuals for UF-5950 - Panafax - Fax

Brands by name

Popular brands

Panasonic UF-5950 - Panafax - Fax, Operating Instructions Manual

Search results

Summary of Contents for UF-5950 - Panafax - Fax

Reviews:

Related manuals for UF-5950 - Panafax - Fax

Brands by name

Popular brands