Installation Manual (for qualified service personnel)
3
Before installation, please read these instructions
carefully.
For Your Safety
Warning
•
Be sure to disconnect the power cord while installing the
unit. Otherwise, it may cause electric shock or injury.
Caution
•
Be sure to put on a glove to avoid electric shock or
injury.
Installation Procedure
1
Remove the Lower Frame Cover and the Control-
Power Cover-Front from the elite Panaboard.
•
Unscrew the 2 screws (
1
) and remove the Lower
Frame Cover from the elite Panaboard.
•
Unscrew the 4 screws (
2
) and remove the Control-
Power Cover-Front from the elite Panaboard.
2
Unscrew the 6 screws (
3
) from the Control Board
Cover Plate.
3
As shown in the diagram below, open the Control
Board Cover Plate (
4
), and disconnect the con-
nector (
5
).
Remove the Control Board Cover Plate (
4
) and
attach the Install-Free Kit (
6
).
4
Connect the connector (
5
) to the Control Board.
5
Attach the Control Board Cover Plate (
4
) using
the 6 screws (
3
).
6
Attach the Lower Frame Cover and the Control-
Power Cover-Front to the elite Panaboard.
•
Attach the Control-Power Cover-Front to the elite Pana-
board using the 4 screws (
2
).
•
Attach the Lower Frame Cover to the elite Panaboard
using the 2 screws (
1
).
1
2
3
5
4
6
