Panasonic U-26PE1U6, Operating Instructions Manual

Page: 11 / 24

11
WIRELESS REMOTE CONTROLLER
UNIT DISPLAY AND OPERATION CONTROLLER
OPERATION lamp This lamp lights when the appliance is turned on.
TIMER lamp This lamp lights when the system is being controlled by the timer.
STANDBY lamp When the unit is in the heating standby condition, the STANDBY lamp lights. If the unit is used for
cooling only, the STANDBY lamp will not illuminate. This lamp operates only when an alarm occurs.
Remote control receiver This section picks up infrared signals from the wireless remote controller (transmitter).
Emergency Operation
button
You can operate this air conditioner using the operation controller without the wireless remote
controller.
TIMER OPERATION
STANDBY
STANDBY lamp TIMER lamp
OPERATION lamp
Emergency Operation button
Receiver
85464609338010_02_EN.fm Page 11 Wednesday, September 2, 2015 12:10 PM