24 -
ENGLISH
Attaching (continued)
2) Lock the display unit.
A
Use a long screwdriver to tighten the lock screw until it reaches the stopper of the set mount.
(The lock screw is tightened by turning it clockwise.)
z
Install the lock screw on either the left or the right.
When installing lock screw on left side
Base plate (Lower)
Lock screw
Unlocked state
(when attaching display unit)
Locked state
(after attaching display unit)
Stopper
When installing lock screw on right side
Base plate (Lower)
Lock screw
Unlocked state
(when attaching display unit)
Locked state
(after attaching display unit)
Stopper
Setting front view (right)
Setting front view (left)
3) When removing the display unit
A
Use a long screwdriver to completely remove the lock screw that is locking the display unit.
(The lock screw is removed by turning it counterclockwise.)
z
The display unit is still in the locked state if the lock screw remains in the wall-hanging bracket.
B
To remove remove the display unit, perform the installation procedure in the reverse order.
Completely remove (when removing display unit)
Completely remove (when removing display unit)
Setting front view (right)
Setting front view (left)
