ENGLISH
- 23
Attaching (continued)
z
Check that the hooks are higher than the cutouts.
Attaching the set mounts to the base plates (upper/lower)
Cutout
Hook
Cutout
Hook
Cutout
Hook
Cutout
Hook
z
As shown in the following figure, visibility is limited when viewing from the side so checking the positions
of the cutouts and hooks will be difficult.
Carefully attach the display unit while listening to the directions of each guide.
Side guide
Hook
Hooks
Hooks
Cutouts
Cutouts
D
Immediately after installation, pull the top of the display unit toward you to confirm that the gap between
the display unit and wall does not increase and that the upper hook parts are definitely fixed in place.
E
Pull the bottom of the display unit toward you to confirm that the gap between the display unit and wall
does not increase and that the lower hook parts are definitely fixed in place.
Attention
z
Be sure to perform the above check work to confirm that the hook parts are all definitely fixed in place.
