31
English
8. Aligning
If the gap between adjacent units is large or differs at the top and bottom or at the left
and right sides, align the unit. With the unit pushed in, turn the adjustment knobs to
adjust the unit’s position. Perform this alignment in the order shown below.
(1)Vertical parallel shift adjustment knob
ⓐ
(2)Horizontal parallel shift adjustment knob
ⓑ
(3)Tilt adjustment knob
ⓒ
(4) Left vertical adjustment knob
ⓓ
/Right vertical adjustment knob
ⓔ
(for adjusting the angle)
• The adjustment knobs can be turned even with the hexagonal wrench in place.
(Movement of the adjustment knobs and markings)
Check the direction of movement of
the adjustment knobs as indicated
by the markings and watch the gauge
while adjusting.
■
Adjusting the vertical parallel shift adjustment knob
ⓐ
(Markings)
Turn clockwise (UP):
Unit shifts upwards in parallel,
remaining level.
Turn counterclockwise (DOWN):
Unit shifts downwards in
parallel, remaining level.
ⓐ
-Gauge
ⓓ
Left vertical adjustment knob
ⓔ
Right vertical
adjustment
knob
ⓐ
-Gauge
ⓔ
-Gauge
ⓓ
-Gauge
ⓒ
-Gauge
ⓑ
-Gauge
ⓒ
Tilt adjustment
knob
ⓐ
Vertical
parallel shift
adjustment
knob
ⓑ
Horizontal parallel shift adjustment knob
ⓐ
Vertical
parallel shift
adjustment
ⓒ
Tilt
adjustment
ⓓ
Left vertical
adjustment
ⓔ
Right vertical
adjustment
UP
UP
DOWN
DOWN
UP
DOWN
Front
ⓑ
Horizontal parallel
shift adjustment
