Panasonic TY-PG70LF50, Fitting Instructions Manual

Page: 19 / 56

19
English
3. Attaching the brackets to the display
3-1. Attach the brackets (large)
㇞
(8) and the brackets
(small )
㇟
(2) to the cabinet fixing brackets of the
display with the supplied screws
㇠
(10), as shown in
the figures below.
(Tightening torque: 0.9 to 1.1 N • m)
Bracket (large)
㇞
Bracket (large)
㇞
Bracket (small)
㇟
Bracket (small)
㇟
Bracket
(large)
㇞
Bracket
(large)
㇞
Screw
㇠
How to attach the brackets (large)
㇞
Screw
㇠
As shown in the gure, hook the bracket (large)
㇞
to the
corresponding cabinet xing bracket.
How to attach the brackets (small)
㇟
Screw
㇠
As shown in the gure, hook the bracket (small)
㇟
to the
corresponding cabinet xing bracket.
4. Placing non-woven fabrics and
rubbers (thin) on the cabinet
4-1. Place the supplied six non-woven fabrics - non-woven
fabrics (long)
㇡
(2) and non-woven fabrics (short)
㇢
(4) - on the inner side surface of the cabinet.
4-2. Place the supplied six rubbers - rubbers (thin / long)
㇣
(2) and frubbers (thin / short)
㇤
(4) - on the inner front
surface of the cabinet.
Non-woven fabric (long)
㇡
Non-woven fabric
(long)
㇡
Rubber (thin / long)
㇣
Rubbers (thin / short)
㇤
Cabinet (upper side)
Rubber (thin / long)
㇣
Cabinet
Cabinet
Non-woven
fabric (short)
㇢
Non-woven fabric
(short)
㇢
Cabinet
(lower side)
The installed position of a PC
board in the lower side cabinet
Non-woven fabric
Non-woven fabric
The center of the lower side cabinet
TY-PG70LF50
Placement
reference Placement
reference
Rubber
Rubber
Non-woven fabric
Non-woven fabric
The rubber and non-woven fabric must
not stick out of the edge of the cabinet.
TY-PG80LF50
Rubber
Rubber
Non-woven fabric
Non-woven fabric
Placement
reference
Placement
reference
The rubber and non-woven fabric must
not stick out of the edge of the cabinet.