Watching TV
3D
Registration
_ST60_ST60X_
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
_ST60_ST60X_
1
Turn the TV on
2
Press the button for about 1 second to turn the power on.
The LED lights for about 2 seconds and then goes off.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 50 cm from the TV while registration in
progress.
3
The red LED lights on the 3D Eyewear for 3 seconds when the
registration is successfully completed
After first registration, the 3D Eyewear will reconnect with TV
automatically when 3D Eyewear is turned on near the TV in 3D mode.
_ST60_ST60X_
Registration again
When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
_ST60_ST60X_
1
Turn the TV on
2
Within 50 cm from the TV, press the button for about 1 second to
turn the power on.
The LED lights for about 2 seconds and then goes off.
_ST60_ST60X_
Release the power switch when registration starts.
_ST60_ST60X_
3
The red LED lights for 3 seconds when the registration is
successfully completed
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
First registration
Perform the first registration when the 3D Eyewear is used for the first time.
1
Turn the TV on
2
Press the button for about 1 second to turn the power on.
The LED lights for about 2 seconds and then goes off.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 50 cm from the TV while registration in
progress.
3
The red LED lights on the 3D Eyewear for 3 seconds when the
registration is successfully completed
After first registration, the 3D Eyewear will reconnect with TV
automatically when 3D Eyewear is turned on near the TV in 3D mode.
1
Turn the TV on
2
Press the button for about 1 second to turn the power on.
The LED lights for about 2 seconds and then goes off.
The 3D Eyewear will be turned on and start registration.
Place the 3D Eyewear within 50 cm from the TV while registration in
progress.
3
The red LED lights on the 3D Eyewear for 3 seconds when the
registration is successfully completed
After first registration, the 3D Eyewear will reconnect with TV
automatically when 3D Eyewear is turned on near the TV in 3D mode.
Registration again
When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
Registration again
When connection with registered TV fails, or when using with another TV,
re-register the 3D Eyewear.
1
Turn the TV on
2
Within 50 cm from the TV, press the button for about 1 second to
turn the power on.
The LED lights for about 2 seconds and then goes off.
1
Turn the TV on
2
Within 50 cm from the TV, press the button for about 1 second to
turn the power on.
The LED lights for about 2 seconds and then goes off.
Release the power switch when registration starts.
Release the power switch when registration starts.
3
The red LED lights for 3 seconds when the registration is
successfully completed
3
The red LED lights for 3 seconds when the registration is
successfully completed
3
(0100806)
Summary of Contents for TY-ER3D5MA
Page 6: ...5 0100807 ...