Panasonic TY-ER3D5MA, Operating Instructions Manual

Page: 2 / 10

Parts name and functions
_ST60_ST60X_
[Front side] [Back side]
_ST60_ST60X_
Power button
Switches the 3D Eyewear on or off.
_ST60_ST60X_
Press the button for about 1 second to turn the power on. The indicator
lamp lights for about 2 seconds and then goes off.
To turn the power off, press the button for about 2 second again. The
indicator lamp flashes 3 times, then the 3D Eyewear turns off
_ST60_ST60X_
Mode
_ST60_ST60X_
Press the button for about 1 second to change the mode between 3D
and 2D (view a 3D image in 2D).
(When power is off) Press the button for 5 second to change to
registration mode.
_ST60_ST60X_
Indicator lamp
Lights or flashes during use to show the status. (see below)
_ST60_ST60X_
Protection film
Peel off the protection film on both side of the lens.
Insulating sheet
Battery cover
_ST60_ST60X_
When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
[Front side] [Back side] [Front side] [Front side] [Back side] [Back side]
Power button
Switches the 3D Eyewear on or off.
Power button
Switches the 3D Eyewear on or off.
Press the button for about 1 second to turn the power on. The indicator
lamp lights for about 2 seconds and then goes off.
To turn the power off, press the button for about 2 second again. The
indicator lamp flashes 3 times, then the 3D Eyewear turns off Press the button for about 1 second to turn the power on. The indicator
lamp lights for about 2 seconds and then goes off.
To turn the power off, press the button for about 2 second again. The
indicator lamp flashes 3 times, then the 3D Eyewear turns off
Mode Mode
Press the button for about 1 second to change the mode between 3D
and 2D (view a 3D image in 2D).
(When power is off) Press the button for 5 second to change to
registration mode. Press the button for about 1 second to change the mode between 3D
and 2D (view a 3D image in 2D).
(When power is off) Press the button for 5 second to change to
registration mode.
Indicator lamp
Lights or flashes during use to show the status. (see below)
Indicator lamp
Lights or flashes during use to show the status. (see below)
Protection film
Peel off the protection film on both side of the lens.
Insulating sheet
Battery cover
Protection film
Peel off the protection film on both side of the lens.
Insulating sheet
Battery cover
When using for the first time, remove the insulating sheet. Pull the
insulating sheet. When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
1 (0100802)