21
English
5. Install the brackets.
ㅌ
ㅍ
ㅎ
Bracket mounting
screws
ネ
Install the gaskets which were adhered at the bracket preparation
stage so that they touch the plasma display.
1. Secure the bracket 1
ㅌ
to the column using the bracket
mounting screws
ネ
.
2. Secure the bracket 2
ㅍ
to the column using the bracket
mounting screws
ネ
.
3. Secure the bracket 3
ㅎ
to the column using the bracket
mounting screws
ネ
.
The screws should be securely tightened to the torque given
below.
(2.2~3.0 N•m)
•
6. Install the frame.
Any of five settings can be selected for the angle at which the
display is to be suspended: 0 degree (perpendicular), 5 degrees, 10
degrees, 15 degrees or 20 degrees.
Which assembly holes in the columns are to be used depends on
the angle at which the display is to be installed.
1. Remove collar
ㅃ
of the prepared M16 bolts
㊍
, and insert collar
ㅃ
into the frame mounting hole in the top part of the column.
※
When the collar cannot be inserted into the frame mounting
hole, loosen the M8 bolts (60 mm)
㊎
to adjust the hole.
1
Collar
ㅃ
㊎
2. Install the frame which was assembled in step 3 on the previous
page onto the column, and secure it using the prepared M16 bolt
㊍
whose collar was removed and the nut
ド
.
3. Select the mounting hole for the desired angle, and secure it
using the prepared M16 bolt
㊍
and the nut
ド
.
2
デ ト ド
デ ト ド
3
0°
5°
10°
15°
20°
Prepared M16 bolt
㊍
whose collar
was removed
Prepared M16 bolt
㊍
The bolt should be securely tightened to the torque given below.
(16~20 N•m)
•
Summary of Contents for TY-CE85PS12
