6
English
POWER
MUTE
RECALL
ASPECT
SAP
R-TUNE
TV/VIDEO INPUT
ACTION
CH
CH
VOL
VOL
POWER button
Turn the display ON or OFF.
RECALL button
Display the channel, the audio mode,
the remaining time of SLEEP timer, etc.
ASPECT button
Change aspect (see page 8).
The remote control
Cursor buttons ( , , , ),
ACTION button
Channel buttons (CH , CH )
Volume buttons (VOL , VOL )
Increase (VOL ) or reduce (VOL
) volume.
MUTE button
Mute the sound or
cancel the mute.
TV/VIDEO button
Select the source of INPUT 1 from TV or VIDEO1.
• This does not work for INPUT 3 or PC input.
• To give a label or to skip VIDEO1 input (see page 10,
CHANNELS menu-INPUT LABEL)
INPUT button
Select the input mode.
Each time you press the button:
• SLOT 1 and 2 (Tuner board) correspond to INPUT 1, SLOT
3 to INPUT 3 and PC IN to PC input.
∗
3 slots model only. You can select INPUT 3 only when a
terminal board is set to SLOT 3.
Numbered buttons
SAP button
Select the audio mode (see page 7).
R-TUNE button
Return to previously viewed channel or video mode.
PC input
INPUT 1
INPUT 3
Control reference of Tuner board and Display
Note
For the common features, be sure to use the remote control of Tuner board.
• Watching TV programs
• Tuning TV channels
• Adjusting the volume
• Muting the sound
• Selecting the aspect mode
• Displaying the current setting etc.
• Selecting the input mode of Tuner board
• Displaying the current setting etc. of Display
• Selecting the input mode of Display
• Turning the display On/Off
The remote control
of Tuner board
The remote
control of Display
• You cannot select the source of INPUT 1 (TV or VIDEO1) with the
display’s remote control.
• Use the remote control of the display when adjusting “PICTURE
POSITION/SIZE” and “SURROUND” on the display. Refer more details
of the display’s controls to the display’s operating instructions.
