- 62 -
3. Select
LNB Configuration
with / and press
OK
to access
●
Select
Dual Tuner Mode
with / , set to
On
with / to use dual
tuner function.
4. Select
LNB
/
Satellite
with / and set with /
●
Select
IN 1
/
IN 2
in
Signal Input
with / to set for each tuner.
1) Set
LNB
first
– If you set to
One LNB
,
LNB
is not selectable.
– If you set to
MiniDiSEqC
or
Single Cable
, select from LNB AA and
AB.
– If you set to
DiSEqC 1.0
, select from LNB AA, AB, BA and BB.
2) Set
Satellite
for the selected LNB
– Select
No Satellite
if you do not know the connected satellite
(available satellite will be searched in Auto Setup).
– Select
User defined
to set
Test Transponder Frequency
manually.
– If you set to
Single Cable
, additional settings are required. Set
User
Band
,
User Band Frequency
and
PIN
(depending on the Single
Cable router you use). For details, read the manual of the Single
Cable router.
Watching Tuning and editing channels Selectable satellites
5. Press
BACK/RETURN
to store
6. Select
Auto Setup
with / and press
OK
to access
7. Select
Satellite
/
Search Mode
/
Scan Mode
with / and press
OK
to
access
8. Set with / and press
OK
to store
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick
:
Scans the suitable frequency for the selected satellite.
●
After settings, select
Start scan
with / and press
OK
to search.
9. The confirmation screen is displayed and press
OK
to start
Auto Setup
(Settings are made automatically)
●
When the operation is completed, the channel at the lowest position will
be displayed.
