manualshive.com logo in svg

Panasonic TX-P46Z11E, Operating Instructions Manual

Share
Download
Panasonic TX-P46Z11E Operating Instructions Manual Download Page 8

8

Accessories

Installing / removing remote’s batteries

1

Pull 

open

Hook

2

Note the correct

polarity (+ or -)

Close

Caution

Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

●

Do not mix old and new batteries.

●

Do not mix different battery types (such as alkaline and manganese batteries).

●

Do not use rechargeable (Ni-Cd) batteries.

●

Do not burn or breakup batteries.

●

Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

Do not disassemble or modify the remote control.

●

Attaching the pedestal

Warning

Do not disassemble or modify the pedestal.

Otherwise the Display Unit may fall over and become damaged, and personal injury may result.

 

●

Caution

Do not use any other TV and displays.

Otherwise the TV may fall over and become damaged, and personal injury may result.

 

●

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic 

 

●

dealer immediately.

During set-up, make sure that all screws are securely tightened.

If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be 

 

●

strong enough to support the Display Unit, and it might fall over and become damaged, and personal injury may 

result.

Ensure that the Display Unit does not fall over.

If the Display Unit is knocked or children climb onto the pedestal with the Display Unit installed, the Display Unit 

 

●

may fall over and personal injury may result.

Two or more people are required to install and remove the Display Unit.

If two or more people are not present, the Display Unit may be dropped, and personal injury may result.

 

●

Pedestal

TBLX0105 (TX-P46Z11E)

●

TBLX0107 (TX-P54Z11E)

●

  Base

TBLA0421 (TX-P46Z11E)

●

TBLA0460 (TX-P54Z11E)

●

  Frame 

TBLA0462 (TX-P46Z11E)

●

TBLA0464 (TX-P54Z11E)

●

Pedestal installation kit

TXFEL01DMUB

●

TXFBL01JUUJ

●

  Assembly screw (2)

(Silver)

XYN8+F30FN

●

  Assembly screw (4)

(Black)

XSB4+10FNK

●

  Assembly screw (4)

(Black)

THEL062N

●

M8 × 30

M4 × 10

M5 × 25

   Holder cover

TBLB3416

●

Summary of Contents for TX-P46Z11E





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands