23
8.2.7.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Unlock the hooks and the tapes to free the cables
2. Disconnect the connectors (P2, P6, P11 and P35).
3. Remove the screws (
×
5 ,
×
1 ,
×
1
) and remove
the P-Board.
8.2.8.
Remove the A-Board
1. Unlock the hooks and the tapes to free the cables.
2. Disconnect the connectors (A1, A6 and A12).
3. Disconnect the USB cable (JK8605).
4. Disconnect the flexible cables (A20, A31, A32 and A33).
5. Remove the screws (
×
4 ).
6. Remove the Side shield metal and the Bottom shield
metal.
7. Remove the A-Board.
8. Remove the screws (
×
5 ).
9. Remove the Heatsinks (bottom-1, -2), the Thermal
conductive sheet and the Heat rubber.
8.2.9.
Remove the Control unit assy
1. Disconnect the connector (C14).
2. Remove the claws (
×
2
) and remove the Control unit
assy.
8.2.10. Remove the Speaker SQs
1. Unlock the hooks and the tapes to free the cables.
2. Disconnect the Relay connector.
3. Remove the screws (
×
2
each) and remove the
Speaker SQs (L, R).
Summary of Contents for TX-P42GT60B
Page 34: ...34...
Page 36: ...36 11 3 Wiring 2 11 4 Wiring 3...
