- 74 -
●
To cancel a timer programming event temporarily
(blue)
– Press again to stop cancelling.
■
To stop recording
1. Press
2. Select the programme with / and press
OK
to access (when 2
recordings are in progress)
3. Select
Yes
with / and press
OK
to stop
■
To play back or delete the recorded contents
TV programmes recorded on the USB HDD with this TV can be played back
in Media Player.
1. Display icons of the feature with
APPS
2. Select
Recorded TV
with / / / and press
OK
to access
●
The recorded content may not be played back properly while 2 recordings
are in progress.
Note
●
TV Guide may also be used to set timer programming event.
Watching TV Guide Timer Programming
●
Timer Programming
can store up to 15 events.
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
For recording using
Timer Programming
, the TV must be either on or in
Standby. For reminders to be displayed, the TV must be on.
●
Depending on the progress of recording, analogue channel may not be
selected.
●
Recording an encrypted (copy-protected) programme may not be possible.
●
2 minutes before the starting time, a reminder message may appear if you
are watching TV.
– To remove the message and start the programming, press
OK
.
– To cancel the programming, press
EXIT
.
●
LED will turn to orange in Standby mode if
Timer Programming
is set.
Summary of Contents for TX-L42DT60E
Page 207: ...Ver 1 01 ...
