- 200 -
Parts of the TV become hot
●
Even if the temperature of parts of the front, top and rear panels has
risen, these temperature rises do not cause any problems in terms of
performance or quality.
Overcurrent error message appears
●
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains power On / Off switch, then turn it on again.
●
Check foreign objects are not inside the USB port.
An error message appears
●
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
The touch pad controller does not work or cannot be registered
●
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
Register again.
Settings Setup VIERA Touch Pad Controller
●
Use the touch pad controller within approx. 3.2 m from the TV. (The range
may be shortened depending on the obstacles between the TV and the
controller, or the surrounding environment.)
Voice Control function does not work
●
Voice Control function may not work properly depending on the
pronunciation, noise and network environment.
●
For details
Summary of Contents for TX-L42DT60E
Page 207: ...Ver 1 01 ...
