Remote Control VCR/DVD Operation
Manufacturers’ Code Settings
This remote control has been designed to work with a variety of VCRs and DVD players. In order for this to
occur, the setting for the VCR or DVD must be programmed into the Remote Control.
1.
To set a VCR, slide the remote control VCR-DVD switch
to VCR.
To set a DVD, slide the remote control VCR-DVD switch
to DVD.
2.
Push the remote control VCR-DVD Power Button
and keep it Pushed.
3.
Enter the Manufacturer’s two-digit code number using the remote control Number Buttons
(The codes are shown below).
4.
Push the STOP button
.
5.
Release the remote control VCR or DVD Power Button
.
6.
Check the operation of the VCR or DVD. If it does not operate correctly, repeat steps 1 to 5 and use
an alternate code (if there is one).
VCR CODES
Manufacturer
Code
Manufacturer
Code
Panasonic /
10, 11, 12, 13
NEC
40, 41, 42, 43
National
ORION
45, 46
AIWA
15, 16
Philips
50
FUJITSU
20
SANYO
55, 56, 57, 58
HITACHI
25, 26, 27
SHARP
60, 61
JVC
30, 31, 32
SONY
65, 66, 67
MITSUBISHI
35, 36
TOSHIBA
70, 71
DVD CODES
Manufacturer
Code
Panasonic
70
NOTES:
1.
If the batteries are removed from the remote control the Manufacturer’s codes are lost and must be
reprogrammed.
2.
The list of manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any
other manufacturer’s product will work with this remote control.
