25
Tuning Menu
Manual Tune
This Television has been factory tuned to all the major city channels. Use this tuning procedure only if you wish to
reset individual Programme Numbers.
The television should be switched ON and the TV/AV Switch set to TV.
Using the Front Panel
1.
Push the button repeatedly until the Tuning
Menu is reached.
2.
Push the or Button to access the Tuning
Menu. (See page 22).
3.
Push the button to select Manual Tune.
4.
Push the or
button to access Manual
Tune.
5.
Push the
button to switch to “Change
Programme”.
6.
Use the or buttons to select the
programme location number to tune.
7.
Push the
button to switch to “Search”.
8.
Push the or button to start the search.
9.
The television will automatically search for the
next broadcast signal. As each station is
found the search will stop. If you do not want
this station restart the search.
10.
Push the to store the selected station.
11.
Push the button to return the television to
the Tuning Menu.
12.
To return the television to normal operation
push the
button on the remote control or
repeatedly push the button until the volume
display appears.
Using the Remote Control
1.
Push the Set Up (
) button.
2.
Push the
or
button to select the
Tuning Menu. (See page 22).
3.
Push the or button to access the Tuning
Menu.
4.
Push the
or
button to select the
Manual Tune.
5.
Push the or button to select the Manual
Tune.
6.
Push the
or
button to access the
programme location number to tune.
7.
Push the or button to start the search.
8.
The television will automatically search for the
next broadcast signal. As each station is found
the search will stop. If you do not want this
station restart the search.
9.
Push the to store the selected station.
10.
Push the Set Up (
) button to return the
television to the Tuning Menu.
11.
Push the
button to return the television to
normal operation.
29
CH 29
PROGRAMME -/+
SEARCH -/+
RETURN
TV/AV EXIT
“STR” BUTTON - STORE
MANUAL TUNE
STR
F
-/\/
+//\
TV/AV
- , +
:
SEARCH
TV/AV
:
MOVE CURSOR
STR
:
TO STORE
F
:
TO EXIT
MANUAL TUNE (FRONT PANEL)
Tuning the Television to a VCR
1.
Turn the VCR On and either start a known tape playing or set the VCR Test Signal, if fitted, to On
(refer to the VCR operating instructions).
2.
Perform the Manual Tuning procedure above. The television will treat the VCR as if it was a normal
television broadcast station.
NOTES:
1.
The antenna lead must be connected to the VCR and the VCR RF-Out must be connected to the TV
RF-In. Please refer to page 34.
2.
The picture and sound quality are usually much better if the VCR is connected using the AV
Terminals. Please refer to page 35.
