Panasonic TX-58DX902B, Ehelp

Page: 48 / 362

■
No signal Power off
1. Display the menu with MENU .
2. Select Timer > No signal Power off and press OK to access.
3. Select On / Off and press OK to set.
No signal Power off
( On / Off )
Automatically turns the TV to Standby mode to prevent unnecessary power
consumption when no signal is received and no operation is performed for 10
minutes.
●
A notification message will appear 3 minutes before going into Standby
mode.
■
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
The concerned items and their current settings are displayed. Select
Set to
Eco to set them to the energy-saving settings at once.
1. Display the menu with MENU .
2. Select Setup > Eco Navigation and press OK to access.
3. Select Set to Eco and press OK to set.
●
Auto Standby and No signal Power off are active when Eco Navigation is
set to Set to Eco .
■
Radio Mode
Sets the timer for turning off the screen automatically when a radio channel is
selected.
1. Display the menu with
MENU .
2. Select Setup > Display Settings > Radio Mode and press OK to access.
3. Select the time and press OK to set.
20 / 15 / 10 / 5 / Off ( seconds )
●
Sound is active even if the screen is turned off. This function is effective in
reducing power consumption when listening to a radio channel.
●
Press any buttons except Standby On / Off switch, Volume Up / Down and
MUTE to turn the screen on.
●
Not valid in Analogue
- 48 -