Panasonic TX-51P100H L, Service Manual

Page: 28 / 108

- 28 -
30. Select the "G-POINT CURSOR" mode by pushing
"TV/AV" button on the remote control.
31. Use the Position Buttons to move the cursor to the
point where you wish to change the data (adjust-
ment lines). Then use the "SOUND MUTE [
]" to
change from "G-LINE CURSOR" to "G-LINE
DATA".
32. Use the Position Buttons to adjust each point so
that the Green Crosshatch Pattern is aligned with
the vertical and horizontal lines of the Conver-
gence Adjustment Sheet.
33. Push the "SOUND MUTE [ ]" and switch from "G-
POINT DATA" to "G-POINT CURSOR".
34. Repeat step 31-33 to adjust all of adjustment
points.
35. Adjust the LINE, EASY2 and POINT DATA again
viewing all over the screen.
If need the adjustment at the around of screen,
select the "PERI-CURSOR" and adjust it.
36. To store the data after the Green Convergence
Adjustment has been completed, push the "MAIN
MENU" button and then push the "N" button (push-
ing the "N" button will store the data in the
E
2
PROM).
37. Remove the Convergence Adjustment Sheet from
the screen.
<Red Convergence Adjustment>
38. Push the "PIP" button twice and change to the Red
Adjustment of Yellow Colour.
39. Repeat the same steps described for the Green
Conv.Adj. in 20~35 to perform the Red Conver-
gence Adjustment.
40. To store the data after the Red Convergence
Adjustment has been completed, push the "MAIN
MENU" button and then the "N" button.
<Blue Convergence Adjustment>
41. Push the "PIP" button twice and change to the
Blue Adjustment of cyan Colour.
42. Repeat the same steps described for the Green
Conv.Adj. in 20~35 to perform the Blue Conver-
gence Adjustment.
43. To store the data after the Blue Convergence
Adjustment has been completed, push the "MAIN
MENU" button and then push the "N" button.
44. To switch from the Convergence Adjustment Mode
to the Service Mode, press the Power button and
then push the "N" button.
Repeat the same adjustment after inputting the
60Hz (NTSC) signal.
G-POINT
CURSOR
[ ]
G-POINT
DATA
Position
Buttons
Green crosshatch patter n
Convergence Adj. sheet lines
(Adjust points = All cross points)
1
4
7
0
8 9
5 6
2 3
?
N
SURROUND
TV
−
AV
D.PNR
VCR/LD/DVD
P. AI
VCR
RGB
TV/TEXT INDEX
F.P.
R G Y B
REVEAL F/T/B
TEXT
TIME
HOLD /
MAIN MENU
LD/DVD
DISE SIDE
A B
STROBE CHANGE PIP ACTION
STILL PIP CH SEARCH
SKIP
SKIP
EXIT
KEY OF REMOTE
IN DIGITAL CONVERGENCE ADJ.MODE
CLEAR
LSI MODE
COPY
STORE
DECISION
ADJ.MODE
ADJ.COLOUR
CURSOR/DATA
SUPER IN PAUSE
OSD ON/OFF
CROSSHATCH
DENSITY
CROSSHATCH
COLOUR