Common Interface
Caution
If the encrypted message is displayed on the screen, the correct Common
Interface (CI) Module and smart card that are required for this service are not
inserted.
■
How to insert CI module and smart card
●
Turn the TV off with Mains Power On / Off switch whenever inserting or
removing the CI module.
●
Depending on the model, it may be necessary to remove the terminal
cover / cable cover before inserting or removing the CI module.
●
If a smart card and a CI module come as a set, first insert the CI module,
then insert the smart card into the CI module.
●
Insert or remove the CI module completely in the correct direction as
shown.
●
Remove the CI module from the TV when placing the TV facing upward.
This may cause damages to the CI module and CI slot.
= Note =
●
There might be some CI modules in the market with older firmware
versions that do not work fully interoperable with this new CI+ v1.3 TV. In
this case, please contact your content provider.
- 268 -
Summary of Contents for TX-50EX750B
