Panasonic TX-48MZ800E, Operating Instructions Manual, Page: 32 / 819

English - 31 -
Lip Sync delay may occur during the timeshifting. Radio
record is supported.
If the writing speed of the connected USB storage
device is not sufficient, the recording may fail and the
timeshifting feature may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not pull out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Some stream packets may not be recorded because
of signal problems, as a result sometimes videos may
freeze during playback.
If a recording starts from timer when teletext is on, a
dialogue will be displayed. If you highlight
Yes
and
press
OK
teletext will be turned off and recording
will start.
Instant Recording
Press the Record button to start recording an event
instantly while watching a programme. Press the Stop
button to stop and save the instant recording.
You can not switch broadcasts during the recording
mode. A dialogue will be displayed if you try to switch
to another channel. Highlight Yes and press OK to stop
the recording and switch the channel.
Watching Recorded Programmes
Select Record List from the Record menu in Live
TV mode and press OK . Select a recorded item from
the list (if previously recorded). Press the OK button
to watch.
Press the
Stop or Back/Return button to stop a
playback.
The recordings will be named in the following format:
Channel Name_Date(Year/Month/Day)_Programme
Name.
Timeshift Recording
In order to use timeshift recording feature the Time
Shift Mode
option in the
Record>Time Shift Mode
menu should be enabled first.
In timeshifting mode, the programme is paused
and simultaneously recorded to the connected USB
storage device. Press the Pause/Play button while
watching a broadcast to activate timeshifting mode.
Press the Pause/Play button again to resume the
paused programme from where you stopped. Press
the
Stop
button to stop timeshift recording and return
to the live broadcast.
When this feature is used for the first time
Disk Setup
wizard will be displayed when the Pause/Play button is
pressed. You can either choose Auto or Manual setup
mode. In Manual mode, if you prefer, you can format
your USB storage device and specify the storage space
that will be used for timeshift function. When the setup
is complete, the Disk Setup Result will be displayed.
Press the Back/Return button to exit.
Timeshift function will not be available for radio
broadcasts.
Disk Format
When using a new USB storage device, it is recom-
mended that you first format it using the Format option
in the Record>Device Info menu in Live TV mode.
Highlight the connected device on the Device Info
screen and press OK or the Right directional button
to see the list of available options. Then highlight
Format and press OK to proceed. A confirmation
dialogue will be displayed. Highlight Yes and press
OK to start formatting.
IMPORTANT: Formatting your USB storage device
will erase ALL the data on it and its file system will be
converted to FAT32. In most cases operation errors will
be fixed after a format but you will lose ALL your data.
Schedule List
You can add reminders or record timers using the
Schedule List menu. You can access the Schedule
List from the Record menu in Live TV mode. Highlight
Schedule List and press OK . Previously set timers will
be listed if any available. Otherwise, a dialogue will be
displayed. Highlight
Add
and press
OK
to add a timer.
Press the Yellow button to add a timer while the
Schedule List menu is displayed on the screen. You
can define the type of the timer by setting the Schedule
Type option as Reminder or Record . When other
parameters are set press the Green button. The timer
will be added to the list.
If any available, you can also edit or delete the timers
on this list. Highlight the timer of your choice and press
the Red button to edit. After you edited the timer press
the Green button to save changes. Highlight the timer
of your choice and press the Blue button to delete.
When you choose to delete a timer a confirmation
dialogue will be displayed on the screen. Highlight
Yes
and press
OK
to delete the selected timer.
A warning message will be displayed asking whether
you want to replace timers, if the time intervals of two
timers overlap. You can not set more than one timer
for the same time interval. To replace the old timer with
the new one, highlight
Yes
and press
OK
. Highlight
No
and press
OK
to edit the last created timer.
Press the EXIT button to close the Schedule List.