Panasonic TX-47P600HM, Manual

Page: 55 / 180

10.3.3.3. "B-SKEW (H)" adjustment
Push the "TV/AV" buttons, and select the "B-SKEW".Push the "Channel up/down" buttons, and
adjust reference line become a horizontal line. (Refer to Fig.K.)
10.3.3.4. "B-SIZE (V)" adjustment
Push the "TV/AV" buttons, and select the "B-SIZE".Push the "Channel up/down" buttons, and
adjust the upper and lower boarder line of test pattern is aligned with the edge of the screen
frame. (Refer to Fig. A.)
10.3.3.5. "B-SIZE (H)" adjustment
Push the "TV/AV" buttons, and select the "B-SIZE".Push the "Volume up/down" buttons, and
adjust the boarder line on either side of test pattern is aligned with the edge of the screen frame.
(Refer to Fig. B.)
10.3.3.6. "B-LINEAR" adjustment
Push the "TV/AV" buttons, and select the "B-LINEAR".Push the "Volume up/down" buttons, and
adjust the "B-LINEAR". (Refer to Fig. C.)
10.3.3.7. "B-PIN (V)" adjustment
Push the "TV/AV" buttons, and select the "B-PIN".Push the "Channel up/down" buttons, and
adjust the "B-PIN (V)" (Refer to Fig. D.)
10.3.3.8. "B-PIN (H)" adjustment
Push the "TV/AV" buttons, and select the "B-PIN".Push the "Volume up/down" buttons, and
adjust the "B-PIN (H)". (Refer to Fig. E.)
10.3.3.9. "B-CORNER" adjustment
Push the "TV/AV" buttons, and select the "B-CORNER".Push the "Channel up/down" buttons,
and adjust the "B-CORNER". (Refer to Fig. F.)
10.3.3.10. "B-KEY" adjustment
Push the "TV/AV" buttons, and select the "B-KEY".Push the "Channel up/down" buttons, and
adjust the "B-KEY". (Refer to Fig. G.)
10.3.3.11. "B-STATIC" adjustment
Push the "TV/AV" buttons, and select the "B-STATIC.Push the "Channel/Volume up/down"
buttons, and adjust "B-STATIC" so that Horizontal & Vertical Center line is aligned with the
bump in the screen center mark.(Refer to Fig. H.)
10.4. Fine Convergence Adjustment
10.4.1. Green Convergence Adjustment
1. Select the "G-LINE CURSOR" mode by pushing "TV/AV" button
on the remote control
53