Panasonic TX-47P600HM Manual Download Page 26

Page: 26 / 180

4. Repeat step 2. for blue.

5. Cover the Green, Blue CRT lens, projecting Red only.

6. Repeat step 2. for red.

7. Cover the Red, Blue CRT lens, projecting Green only.

8. Adjust green centering magnets until the center of the

monoscope pattern line up with the screen center line.

9. Cover the Green, Red CRT lens, projecting Blue only.

10. Adjust blue centering magnets to position the center of the blue

raster W2 away from the center of the green raster.

11. Cover the Green, Blue CRT lens, projecting Red only.

12. Adjust red centering magnets to position the center of the red

raster W1 away from the center of the green raster.

Summary of Contents for TX-47P600HM





















































































































































































Search results

Summary of Contents for TX-47P600HM

Reviews:

Related manuals for TX-47P600HM

Brands by name

Popular brands

Panasonic TX-47P600HM, Manual

Search results

Summary of Contents for TX-47P600HM

Reviews:

Related manuals for TX-47P600HM

Brands by name

Popular brands