English
- 5 -
Environmental Information
This television is designed to be environmentally
friendly. To reduce energy consumption, you can
follow these steps:
If you set the
Energy Saving
to
Minimum
,
Medium
,
Maximum
or
Auto
the TV will adjust the energy
consumption accordingly. Set as
Off
to turn this setting
off. If you like to set the backlight to a fixed value set as
Custom
, highlight the
Backlight
(will be located under
the
Energy Saving
setting) and then adjust manually
using Left or Right directional buttons on the remote.
Note:
Available
Energy Saving
options may differ depending
on the selected
Mode
in the
Settings>Picture
menu.
The
Energy Saving
settings can be found in the
Set-
tings>Picture
menu. Note that some picture settings
will be unavailable to be changed.
You can also turn the screen off using the
Screen Off
option, if you want to hear the sound only and don't
need to watch. If pressed Right button or Left button
consecutively
Screen Off
option will be selected and
“
Screen will be off in 15 seconds.
” message will be
displayed on the screen. Select
Proceed
and press
OK
to turn the screen off immediately. If you don’t
press any button, the screen will be off in 15 seconds.
Press any button on the remote or on the TV to turn
the screen on again.
Note: Screen Off
option is not available if the
Mode
is set
to
Game
.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce or stop the energy consumption.
Features
• Remote controlled colour TV
• Fully integrated digital terrestrial/cable/satellite TV
(DVB-T-T2/C/S-S2)
• HDMI inputs to connect other devices with HDMI
sockets
• USB input
• OSD menu system
• Stereo sound system
• Teletext
• Headphone connection
• Automatic programming system
• Manual tuning
• Automatic power down after up to eight hours.
• Sleep timer
• Child lock
• Automatic sound mute when no transmission.
• NTSC playback
• AVL (Automatic Volume Limiting)
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
• Put the TV onto a work table with the screen panel
down on the clean and soft cloth. Leave the stand(s)
protruding over the edge of the surface.
• Unscrew the screws that fixing the stand(s).
• Remove the stand(s).
When using the wall-hanging bracket
Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation;
Rear of the TV
a
b
43”
50”
55”
65”
a (mm)
100
200
200
400
b (mm)
100
200
200
200
View from the side
c
VESA
Bracket
e
d
(
d)
(
e)
43”
50”
55”
43”
50”
55”
Diameter
M4
M6
M4
M6
Depth of screw (c)
min.
7 mm
5 mm
max.
10 mm
6 mm
(
d)
(
e)
65”
Depth of screw (c)
min.
7 mm
max.
10 mm
Diameter
M6
Note:
The screws for fixing the TV onto the wall-hanging
bracket are not supplied with the TV.
Summary of Contents for TX-43MX600E
Page 354: ...Ελληνικά 23 ...
