Panasonic TX-40HX800B, Ehelp

Page: 343 / 355

No image is displayed
●
Check the correct input mode is selected.
●
Check the setting of AV ( COMPONENT / VIDEO ) in Input Selection to
match the signal being output by the external equipment.
Watching > External equipment
●
Is Luminance Level , Backlight , Contrast , Brightness or Colour in the
Picture Menu set to the minimum?
Watching > For best picture > Basic settings
●
Check all required cables and connections are firmly in place.
Blurry or distorted image (no sound or low volume)
●
Reset channels.
Watching > Tuning and editing channels > Auto Setup
There may be a short black image
●
A black image is displayed to avoid picture distortion when an input signal
changes.
There may be white, red, blue, green and black spots on the screen
●
This is a characteristic of the panels and is not a problem. The panel is
built with very high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed
point of white, red, green, blue or black. Please note this does not affect
the performance of the panel.
Only for the OLED TV
A white horizontal line appears in Standby mode
●
A white horizontal line may appear on the screen for a while to adjust the
panel. This is not a malfunction.
- 343 -