TV/AV
SET UP
15
The Setup menu provides access to various advanced features and also to the
Tuning menu
Open the Setup menu
Move to your choice
Increase or decrease levels, set
options or access further menus
Press the TV/AV button to exit the
Setup menu
Offers a choice of signals to send to the AV2 Scart socket. You can choose from
the current
TV
programme position, the signal entering
AV1
/
AV3
/
AV4
or
Monitor
--- the picture displayed on screen.
The Teletext option allows you to choose between TOP / FLOF or LIST mode.
See page 26.
Off timer will switch the TV off within a preset time which you can choose from
between 0 to 90 minutes in 15 minute intervals.
You will normally find that Flicker reduction is best set to
On
to reduce any slight
picture movement. However, it is possible that some occasional broadcasts
may benefit by selecting the
Off
position.
Q
--
Link allows you to enable or disable data communication with a compatible
VCR. See page 23.
Select character set, so that all characters needed are availabe for text on
teletext pages (eg: cyrillic characters, etc).
Mode
Languages
West
:
English, French, German, Greek, Italian, Spanish, Swedish,
Turkish
East1
:
English, Estonian, Lett, Rumanian, Russian, Ukrainian,
Lithuanian
East2
:
Czech, Hungarian, Lett, Polish, Rumanian, Lithuanian
The Tuning menu provides an entry to many other features including
Programme edit, ATP, Fine tuning, Manual tuning, Colour system and Volume
correction. See page 16.
OSD language allows you to select the language used for On Screen Displays.
See page 24.
If you notice a slight tilt to the picture or if there are coloured patches at the
corners of the screen, use this feature to eliminate them. See Step 7, page 7
(Quick Start Guide).
SETUP MENU
Setup menu
AV2 out
TV
Teletext
List
Off timer
Off
Flicker reduction On
Q-Link
On
Text language
West
Tuning menu
OSD language
Geomagnetic
Off timer
Teletext
Q
--
Link
Flicker
reduction
AV2 out
Text language
Tuning menu
OSD language
Geomagnetic
