Panasonic TX-32DK20P, Operating Instructions Manual

Page: 8 / 32

8
The widescreen TV will allow you to enjoy viewing the picture at its maximum size, including
widescreen ‘cinema format’ pictures.
Note: Just mode is not available when viewing an RGB source.
Press the ASPECT button to
move through the six aspect op-
tions: Panasonic Auto, 4:3,
Zoom, S---Zoom, 16:9 (Full) and
Just
Panasonic Auto
Some broadcasts are transmitted
together with a wide screen identifi-
cation signal (WSS). If the TV re-
ceives this signal then it will auto-
matically switch to wide screen 16:9
mode, maximum display.
The automatic widescreen switch-
ing depends upon reception condi-
tions and the strength of the signal. If
the signal is poor and therefore the
WSS is weak then it is possible that
the picture may not expand to full
size and that the TV will display black
areas around the edges.
If the original source signal was a
standard 4:3 aspect ratio then you
might prefer to view it in its original
size; the red and green keys that ap-
pear will allow you to choose be-
tween viewing at standard 4:3 size
or expanded in Just mode.
4:3
4:3 will display a 4:3 picture at its
standard 4:3 size and can be se-
lected if you wish to view in this for-
mat.
Zoom
Zoom
mode magnifies the central
section of the picture.
The picture can be moved and en-
larged vertically using the coloured
keys. The former adjustment is use-
ful for viewing any sub---titles which
may appear outside the picture.
ASPECT CONTROLS
ASPECT
Panasonic Auto
4:3
Zoom
VSize-- VSize+ VPos.-- VPos.+
Panasonic Auto
4:3 Just
4:3
Zoom