Panasonic TX-29PS62Z, Service Manual

Page: 9 / 13

http://servis-manual.com/
5.7 NTSC COLOUR OUTPUT
TOP PREVIOUS NEXT
TOP PREVIOUS NEXT
Item/Preparation Adjustment Procedure
1. Apply 3.58MHz NTSC Rainbow pattern.
2. Connect an oscilloscope to TPA36 or TPL1 (R OUT).
3. CHK2 and press digit key “5” (AKBOFF).
4. Connect a short jumper to FBT pin 3 or TPA34 and TPA5.
5. Set control :
Picture menu.......................DYNAMIC CONTROL
Channel Colour Set...........STD
1. Adjust Bright Control.
a = 2.3 ± 0.2Vp-p
2. Connect the waveform.
b = 1.3 ± 0.5Vp-p
Before Colour Purity, Convergence and White Balance adjustments are attempted, V. Center, V. Height, H. Width, H. Center and Focus adjustments must be
completed.
9. 6. 2004 file://C:\Documents%20and%20Settings\Admin\Plocha\TX-29PS62Z\s0507000000.htm