5.4. SUB TINT
Item/Preparation
Adjustment Procedure
1.
Receive a 3.58 MHz NTSC rainbow pattern
2.
Connect oscilloscope to A51 pin 50.
3.
Set controls:
BRT............. ...CENTER
COLOUR........CENTER
CONTRAST....MAX
NTSC TINT.....CENTER
AI................ ....OFF
1.
Adjust Sub NTSC Tint so that the peak of level of waveform is
similar to Fig. 3
Fig. 3
2.
Receive the Rainbow pattern (3.58 MHz NTSC) on both of Main
and Sub pictures.
3.
Adjust Sub NTSC Tint 2 so that the peak of level of waveform is
similar to Fig. 4.
Fig. 4
5.5. SUB COLOUR
Item/Preparation
Adjustment Procedure
1.
Receive a 3.58 MHz NTSC rainbow pattern
2.
Connect oscilloscope to A51 pin 48.
3.
Set controls:
BRT............. ...CENTER
COLOUR........CENTER
CONTRAST....MAX
AI................ ....OFF
1.
Adjust Sub Colour:
A = 3.3 ± 0.5V
Fig. 5
12
TX-29P180X
Summary of Contents for TX-29P180B
