8
2
Programmes will appear immediately if your dealer
has programmed the TV for you.
First, the TV will search for analogue stations.
When the search for analogue stations is complete, the
TV will continue to search for DTT stations.
TV stations will be located, sorted into order and stored
ready for use.
1
Ensure that the
VCR is in Standby mode
.
Plug the TV into mains socket and switch ON.
Mains
Socket
D
DTT Stations
:
Are sorted by their logical channel number.
D
Analogue Stations
:
All analogue stations, sorted into channel order.
Stations are sorted into the following order:
The sorted programme order depends upon the TV signal, the broadcasting system, and reception conditions.
DTT
BACK UP
MENU
This will take about 6 mins.
If both connections are available, you may select
“Aerial and Dish”. See
If you have not connected your dish, select “Aerial
only”. A dish may be installed at a later date. See
Aerial and Dish
The TV set will switch to Sky mode and
automatically detect and store all available
channels. The TV will then tune to the Sky
welcome channel. If you have inserted your Sky
viewing card you will be able to view a
demonstration of how your Sky system works.
Press the
TV/AV
button followed by the
Green
multi function button to switch to DTT mode.
Aerial only
Programmes will appear immediately if your dealer
has programmed the TV for you.
First, the TV will search for analogue stations.
When the search for analogue stations is complete, the
TV will continue to search for DTT stations.
TV stations will be located, sorted into order and stored
ready for use.
3
2
3
QUICK START GUIDE
