23
Owner I.D. allows you to enter a security code and address information so that in the unfortunate
event of theft it will help the Police to determine the owner.
If the Owner I.D. information was not entered after Auto setup or it is necessary to alter some of the I.D.
information it can be re
--
accessed via the
Tuning menu. As the Tuning menu is not available in Digital
satellite (DSAT) mode,
Owner ID can be found in the Setup menu.
From the Main menu, access the
Setup menu (Digital satellite,
DTT and Analogue modes)
In Digital satellite mode, move to
Owner ID
OR
In DTT or Analogue mode, move
to Tuning menu
Access Tuning menu
Move to Owner I.D.
THEN
Access Owner I.D.
If the Owner I.D. has previously
been set, enter the
PIN NUMBER
(using 0 to 9 on the remote control)
followed by
OK
to proceed, this will
take you to the
NAME
option
If no Owner I.D. has previously
been set, enter the required 4 digit
Owner I.D.
PIN NUMBER
(using 0
to 9 on the remote control)
If a 4 digit
PIN NUMBER
was
entered above, you will be taken
automatically to the
NAME
line
If not, move to the
NAME
line
Change character
Select character position
Repeat above until
NAME, HOUSE
NUMBER
and
POSTCODE
are
entered
Press OK to store the details.
Press again, to confirm, when
asked, “Are you sure ?”
TUNING MENU
--
OWNER I.D.
For future reference,
write your PIN Number here :
OR
THEN
